Explosion-Proof (Ex d) – Efficiency E2

• Fans
• Blowers
• Conveyor Systems
• Mills
• Cranes
• Pumps

• Frame 90S up to 355M/L
• Degree of Protection: IP 55
• Outputs: 0,37 up to 315kW
• Voltages 240/415 up to frame 100L/415V for frame 112M and up
• Service Factor:1,0
• Design N
• Continuous duty
• Thermistors (2/phase)
• Enclosure TEFC (Totally Enclosed Fan Cooled)
• Mounting B3R
• Lip Seal up to frame 280,315 and 355 (4, 6 and 8 pole)
• Regreseable bearing system for frames 225S/M and above
• Metric thread cable entries
• Cast Iron fan
• Space Heater
• Paint Collor: 7.5 R 4/14 (red)

• Class H” insulation
• Degree of Protection IP 56 and IP 65
• Oil Seal, W3 seal, Labyrinth Taconite
• Cable glands

More options available, on request

WEG Explosion Proof motors are suitable to operate in Zone 1, Group I/II B, class of temperature T4.Note: The classification in Zone 1 means that the motor is suitable to operate also in Zone 2 once Zone 1 represents an operating condition worse than Zone 2. The same applies to Groups and Classes of Temperature: WEG Explosion Proof motors are suitable to operate also in Group II A, Classes of Temperature T3, T2 and T1.

In Australia and New Zealand, WEG Explosion Proof Motors are certified by Test Safe Australia as per IEC 60079-0:1998, IEC 60079-1:2001 and IEC 60034-5:2000. The certified number is ANZEx 04.3006X – July 29th, 2004.

Worldwide Entities that Approved WEG Explosion Proof Motors:

---